PDA

View Full Version : Clicking sound after a series of bursts.


Velocity
July 18th, 2008, 01:31
This happens after a few shots. After firing a few bursts, a clicking sound will be heard when pulling the trigger and the gun won't fire anymore. I'm sure the battery is fine. The battery is ok when used in another gun that has a higher spring rating.

G&P metal body
Element Level 3 switch assembly
SP120
Guarder Steel Stock Ratio gears.


Note:

The switch assembly is not screwed to the gearbox. The screw I used with the previous gearbox doesn't fit the new gearbox. Could that be it?

norman3312
July 18th, 2008, 10:08
What is the gun sir?

I've experienced the clicking sound too, but it usually happens when the sector gear stops in a position where the cut-off lever is engaged, producing the clicking sound during semi-auto. But in full auto, it works.

And, this is the AEP part of the forum, so I'm a bit confused as to what you are referring to.

journeyman
July 18th, 2008, 10:23
yah sir, off topic kayo, AEP section po ito sir