advice about JG CQB

[jerel17]

hi sirs,ask ko lang kung kakayanin ng JG CQBR ko yung 130spring and lipoly chiklet? nag CTR butt kasi ako,balak ko na ilagay yung lipoly sa butt tube...kayanin kaya ng ibang stock internals ko yung 130spring and lipo batt? thanks :icon_biggrin:

[Jay Santos]

hi sirs,ask ko lang kung kakayanin ng JG CQBR ko yung 130spring and lipoly chiklet? nag CTR butt kasi ako,balak ko na ilagay yung lipoly sa butt tube...kayanin kaya ng ibang stock internals ko yung 130spring and lipo batt? thanks :icon_biggrin:

higher spring = higher tension
its the wear and tear of your gears that will suffer. if you upgrade your spring, better upgrade your battery as well. this will also affect your ROF.
internal parts you need to replace due to wear and tear when upgrading your spring.
1. gears
2. piston body
3. motor
hope this helps.
...jrs out...

[jerel17]

higher spring = higher tension
its the wear and tear of your gears that will suffer. if you upgrade your spring, better upgrade your battery as well. this will also affect your ROF.
internal parts you need to replace due to wear and tear when upgrading your spring.
1. gears
2. piston body
3. motor
hope this helps.
...jrs out...

thanks sa input sir jrs =)

[markphiliplim]

kaya yan, we used 140 springs here on stock gears and totsirol lipoly and china piston body
the piston will last maybe 40t rounds bago ma sira now with the help of few AOE mod tumatagal na.
but just change your piston nlng to systema aluminum pra ok. even at 140 spring.

[hans]

hi sirs,ask ko lang kung kakayanin ng JG CQBR ko yung 130spring and lipoly chiklet? nag CTR butt kasi ako,balak ko na ilagay yung lipoly sa butt tube...kayanin kaya ng ibang stock internals ko yung 130spring and lipo batt? thanks :icon_biggrin:

JG internals are good up to sp130 spring.:icon_smile:

[johnhermie11]

nag CTR butt kasi ako,balak ko na ilagay yung lipoly sa butt tube:


sir if im not mistaken..the batt that can fit in tha buffer tube would be a tootsie roll type.

chicklet type would be too wide and will not fit the butt tube.

[jerel17]

guys thanks sa help!!! :icon_smile::icon_smile:

[TwoZero]

hi sirs,ask ko lang kung kakayanin ng JG CQBR ko yung 130spring and lipoly chiklet? nag CTR butt kasi ako,balak ko na ilagay yung lipoly sa butt tube...kayanin kaya ng ibang stock internals ko yung 130spring and lipo batt? thanks :icon_biggrin:

Sir, yung JG M4-CQB internals kaya ang SP130, pero for awhile lang ho, yul nid 2 upgrade most of your internals afterwards, pati yung motor at bats nyo.. to maintain the SP130 springs. mag reinforced GB na rin kayo...

The more powerful your AEG the more your maintenace rin...

Suggestion lang po... try SP120...

Enjoy the Game... Ahoo! Ahoo! Ahoo!

[jerel17]

Sir, yung JG M4-CQB internals kaya ang SP130, pero for awhile lang ho, yul nid 2 upgrade most of your internals afterwards, pati yung motor at bats nyo.. to maintain the SP130 springs. mag reinforced GB na rin kayo...

The more powerful your AEG the more your maintenace rin...

Suggestion lang po... try SP120...

Enjoy the Game... Ahoo! Ahoo! Ahoo!

thanks bro!

[moymicasti]

sir ung sa akin sp 130 ang set up walang ibang nilagay kundi shims lang.so far so good mga 6 months lang.

[roughneck]

pwedeng mgfit sa butt tube ang chicklet type, pero u need to cut a portion of ur tube gaya ng ginagawa namin. kahit firefox na 2300mah kasya, sp120 or pdi 190 lang gamitin mo bro

[jerel17]

ang nilagay ko palang now is 130 spring,,tootsieroll na lipoly,and metal bushing,..nagmisfeed kaya baka lagyan ko rin ng sectorchip..ttignan ko kung mawawala misfeed =)

single firing no misfeed,
rapid firing meron misfeed lalo pag babad,,pa burst burst firing wala misfeed.