View Full Version : does my aeg still work?
asura757
April 20th, 2009, 00:07
hi sirs i have an a&k m4 ris and havent fired it in a while like months(with no maintenance) and im wondering if it still working if its not what parts is necessary to be changed
thanks for you reply :icon_biggrin::icon_biggrin:
City Hunter
April 20th, 2009, 07:05
Unless the unit is stored in a really hot or really wet place ay your gun should still be working. Not unless nga pala maraming ipis and/or daga rin sa place where you stored it.
Just charge a battery and test the gun every now and then. Syempre, check mo muna as much as you could without disassembling it like baka shorted na yun wirings, etc.
jomarx
April 20th, 2009, 10:41
Also try to relube your AEG, some parts might have already dried up (especially if stored in hot places).
trackPlug
April 20th, 2009, 10:50
im more afraid of the spring...bka hindi sya relaxed bago mo sya tinabi.
tirog
April 20th, 2009, 11:16
you'll never know unless you try...:icon_biggrin:
limar
April 20th, 2009, 11:17
its high time to bring it to a technician and have it overhauled(regreasing, resealing, hop, circuit, motor and battery check)
asura757
April 20th, 2009, 19:03
e sir yung battery ko kinuha nang pinsan kong nag aairsoft din so im planning on buying a battery Lipoly 1200mah 11.1v Tootsie Roll / 12c aus lng po ba to? stock lng po yung aeg
jomarx
April 20th, 2009, 20:20
Its ok, the lipo is not that strong, and it will not harm your AEG. But its better to reshim/relube first for better results.
sygrene
April 20th, 2009, 20:31
uu tama sir jomarx sir.. unless malakas loob mo na itry na agad yung bengt beng mo ahahaha
Gab3r7
May 4th, 2009, 18:29
just try using your guns and see if its working pa
Polar Bear
May 5th, 2009, 09:42
hi sirs i have an a&k m4 ris and havent fired it in a while like months(with no maintenance) and im wondering if it still working if its not what parts is necessary to be changed
i have guns that haven't been fired for a year or two, and they still work okay....
if your gun ain't working no more, there are so many components that could have failed.... since you're asking the question, it's safe to assume that you know next to nothin' 'bout 'em airsoft guns, so best bring yours to the nearest friendly airsmith for some tender lovin' care....
ronald_teng
May 23rd, 2009, 11:08
it should still work
potato_chips
May 29th, 2009, 20:09
ofcourse sir.. not unless sira na batt mo..
vBulletin® v3.8.5, Copyright ©2000-2010, Jelsoft Enterprises Ltd.