vforce or xtreme rage mask?

[alas]

sir anu mas maganda sa inyo xtreme rage or vforce mask?
any pros and cons?

[Madz]

for me V Force, don't wipe the lense with anything, baka mawala and anti fog coating nya

[black_ops]

As a paintballer before shifting to airsoft, I would choose a low profile type of mask, v force was in the industry for quite some time now these masks are for starters but some still preffers to use it, extreme rage masks, still low end but was based with Dye invision masks which professional ballers use, its low profile and is close to your face like sensei masks. protection wise id pick E-rage

[jerel17]

feedback pa guys,,,tnx..

[Resbak]

gamit ko dati v-force mask, tama sabi ni sir mongul, kelangn mong gumalaw iwas fog talga
nasubukan ko sa denr baguio dati v-force gamit ko maghapon n game nung last game medyo umambon n dun lang nag fog ang ginawa ko galaw ako ng galw yun nawala nmn sya,saka natamaan n rin sa lens dati talagang matibay kala ko nga nagasgasan hde nmn flawless parin yun medyo mahihirapan k nga lng tumingin sa scope kung e2 gamit mo medyo bulky sya lalo n banda sa bigbig saka e2 talga gamit nun pa ng mga nag papaintball kaya subok n talga ewan ko lng extreme range mask mukhang maganda rin mnm sya pero dko pa kcnatry yun e

[Blaze]

Xtreme Rage for me, since it has a more comfy strap and lining; fog wise, Xtreme rage is the best since it come with a built in fan.

[jerel17]

so nagffog din pala xtreme rage?

[coldsteel]

Yes sir, extreme rage still susceptible to fogging, same with the V-Force. Better install a fan if you choose to use V-Force or E-Rage masks.

[jerel17]

ganun ba,d pede daanin sa shampoo sir?tnx

[angelo18]

sa mga ganyang klaseng lensed type mask, dmo maiiwasan ang fogging kasi yung temperature sa labas ng lense and inside ay magkaiba. Kalimitan mas maiinit ang temp. sa loob ng lense dahil sa pawis sa mukha kaya it tends to generate moise na nagiging fos. shampoo are just short term solution... the best is installing a fan...umuulan umaraw ok yan. I am using a extreme rage mask. Natamaan na ako sa lence (10-15m) pero parang wala lang...it looks good and fit well. Para ka naring naka nect protector compared to some v-force..

[mekok45]

actually booth extreme rage and v-force are same mas maangas lang ng konti ang extreme rage pero parang pareho lang sila in terms of durabilty mura pa ang extreme rage

[xeifer]

mas magaang ang extreme rage
mas matagal mag fog
mas makapal ang foam
mas mura ung walang fan ng 200
mas maliit ung lower mask kaya u can use scope
mas malaki visibility


kaya extreme rage ako... ngamit ko n yang dalawa

v-force naman

made in canada
mas maganda ang finishing
un lang!!!!!!

[maverick_173]

sir, made in chine po ba ang extreme rage? yun po kasi nabili ko...i dont know if thats the original stuff. P1500 price nya...tnx sir.

[xeifer]

yes sir china un

[jerel17]

na try ko na extreme rage,,ok sha,,maganda porma,,,malaki lang sa una,and hirap mag scope talaga pag full face mask ang gamit,,,sanayan lang..nagffog din sha,,hindi ko pa na try yung shampoo sa lens.update ko nalang kyo pag na try ko na,,,

[johnbenr22]

Xtreme rage..... hmm low end? i guess not bro... isa sya sa mahal ng mask now and ung v force?,.... although meron ako nun as in my pic... un ang pinapagamit ko sa utol ko.. kc parang pang grl... mas meaner looking ang xrage.. and it does not fog that much

[madsky]

cnu nagbebenta ng rage msk xray esp ung fullface cover? pls pm me asap at price rage.

[MightyMouse]

kung fogging mga sir try nyo ung ESS na may Twin Turbo Fan. SWABE! walang problema..;)

[Clipper]

My xtreme rage just arrived this afternoon. Since i'm new in airsoft, this is my first. The review here a plus so i decided to go xtreme rage mask. This coming saturday i will use it. Expectations of fogging etc... i guess its a fine mask... covers my ears and the sight/vision angle is a plus.:icon_biggrin::icon_surprised: Salamat mga sir sa review...!

[penggoy_29]

http://www.filairsoft.com/forum/picture.php?albumid=295&pictureid=2224

http://www.filairsoft.com/forum/picture.php?albumid=295&pictureid=2223

http://www.filairsoft.com/forum/picture.php?albumid=295&pictureid=2219

http://www.filairsoft.com/forum/picture.php?albumid=295&pictureid=2218

fans intalled to komrads maporms' full face mask to solve the fogging prob....

look at the switch...so small and tidy that looks like it was intended for the mask...

[Gigabyte]

Sir magkano ang ganyang fan? para sa VFORCE Armor sana.. pa PM naman

[Josh Acosta]

@ gigabyte - sir try contacting penggoy 29. the fans work like a charm! dapat pala di ko na binutasan yung salamin ng mask.

[Clipper]

Extreme Rage pa rin... maganda ang vision angle ng extreme rage, wide vision kita sa gilid. Ears and the jaw is fully protected. :icon_wink::icon_biggrin:

[UnGaS]

looks, its extreme rage for me. its smaller and more compact.

[Clipper]

This is what i did with my Extreme Rage Mask. I painted/sprayed it using Pure Acrylic paint specifically the colors Army Green, Khaki and Flat Clear for top coating. I decided to paint it because i guess black (the original color of the mask) is not suited for jungle games.

Pure Arcyclic paints are durable, highly UV resistant so it doesnt crack, it takes years before it faids, can resist bending or flex compared to Acrylic Epoxy paint. Most hardware stores here in our country sell Arcylic Epoxy paints. I guess i just got lucky... saw a Pure Acrylic and bought it right away eheh... it is highly recommended for full face masks. :icon_wink:

This is my finished product:
:icon_razz::icon_surprised::icon_smile:

[img=http://img518.imageshack.us/img518/3360/maskmodified1mz9.th.jpg] (http://img518.imageshack.us/my.php?image=maskmodified1mz9.jpg)[img=http://img518.imageshack.us/images/thpix.gif] (http://g.imageshack.us/thpix.php)

Click on the link.

:icon_rolleyes::icon_rolleyes:



****