My Airsoft Shop TLP Bunker G-Project Airsoft Shop Lock Airsoft Tiger111hk Airsoft Peak


User Tag List

Page 1 of 7 123 ... LastLast
Results 1 to 10 of 69

Thread: TU springs = FAIL!

Share/Bookmark
  1. #1
    Join Date
    Nov 2008
    Location
    14°56'N120°30'E
    Posts
    1,544
    Rep Power
    0

    Default TU springs = FAIL!

    never buy tu springs... they suck bigtime!!

    my beng clocks @ 500 fps on 0.25 before the gun ban (guarder sp150)
    because it was not used for months i decided to change the spring and lubricate the internals before using it again after the gunban (thanks to sir alencore)... i bought tu spring 150 and changed my settled sp150...

    to my surprise it only clocks @ 450 fps on 0.20... WTF?!?
    my settled sp150 was way stronger compared to this cheap "US" made spring...

    "This is my Kung-Fu!"
    M4/M16 Fan? Join M4FORCE now!

  2. #2
    Join Date
    Aug 2009
    Location
    Pampanga/Baguio
    Posts
    2,724
    Rep Power
    17

    Default Re: TU springs = FAIL!

    ahahaha TU fails again!!

  3. #3
    Join Date
    Aug 2007
    Location
    around d corner
    Posts
    612
    Rep Power
    7

    Default Re: TU springs = FAIL!

    As expected....

  4. #4
    Join Date
    May 2009
    Location
    Q.C.
    Posts
    100
    Rep Power
    0

    Default Re: TU springs = FAIL!

    Hehehehehehehe

  5. #5
    Join Date
    Jan 2009
    Location
    taga dito
    Posts
    412
    Rep Power
    9

    Default Re: TU springs = FAIL!

    goodnews supremo! thanks to tu! pwede ka na maglaro sa lz bravo!

    "The dead knows only one thing: it is better to be alive." -private joker

  6. #6
    Join Date
    Aug 2007
    Posts
    861
    Rep Power
    7

    Default Re: TU springs = FAIL!

    another one bites the dust

  7. #7
    Join Date
    Apr 2008
    Location
    Mogadore
    Posts
    3,460
    Rep Power
    59

    Default Re: TU springs = FAIL!

    as time goes by, it is not only the spring that is degrading sir... there might be other factors instead of putting all the blame to the TU-150 although i do not say that you are wrong.. check the o-rings and other parts of a probable failure..

    did you know that just last Saturday, a techpro-130 spring clocked at 510fps made possible by SF Saddam...? i dont think that tp-130 is stiffer than tu-150 when both springs are brandnew..

    thus, i suggest you should investigate further.. you may be barking at the wrong tree sir.. sayang yung spring.. hehe..
    +70 threads and +6,500 visits.. follow me @ Majinbu's Review
    and I'm not Hack.. I am Setrakus Ra!

  8. #8
    Join Date
    Nov 2008
    Location
    14°56'N120°30'E
    Posts
    1,544
    Rep Power
    0

    Default Re: TU springs = FAIL!

    charge it on experience nalang... super fail talaga...

    @hyper

    tama pwede na ako sa lz hahaha pasok na sa fps limit beng ko... amph!!!

    "This is my Kung-Fu!"
    M4/M16 Fan? Join M4FORCE now!

  9. #9
    Join Date
    Jan 2010
    Location
    BF Paranaque
    Posts
    1,175
    Rep Power
    6

    Default Re: TU springs = FAIL!

    di kaya lemon sir jio nakuha mo?

    Our greatest glory is not in never falling, but in rising every time we fall
    It's nice to be back

  10. #10
    Join Date
    Nov 2008
    Location
    14°56'N120°30'E
    Posts
    1,544
    Rep Power
    0

    Default Re: TU springs = FAIL!

    ewan ko... kay worm ko nakuha to sir... ok naman yung reputation nila as a shop so i doubt it... balik ko nalang yung sp150 pag sinipag ako ehehe

    "This is my Kung-Fu!"
    M4/M16 Fan? Join M4FORCE now!

Page 1 of 7 123 ... LastLast

Similar Threads

  1. What most single parents fail to see...
    By Denski Sison in forum It's a Girl Thing (IGT)
    Replies: 0
    Last Post: March 7th, 2011, 19:44
  2. Epic fail moment
    By freon in forum General AS Discussion
    Replies: 7
    Last Post: September 9th, 2009, 04:09
  3. Springs?
    By danielofski in forum Gearbox
    Replies: 11
    Last Post: April 9th, 2009, 12:33
  4. springs to aeg's
    By Black Watch in forum Tech/ Reviews on SPRINGERs
    Replies: 7
    Last Post: November 9th, 2008, 20:46
  5. all about springs!
    By mad_angel in forum General
    Replies: 2
    Last Post: August 1st, 2008, 09:19

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •