JG Spetznas review from a TM vet (part 1)

[malloski]

... JG upgrading continued...

at this point, i'd like you to refer to the AK47 manual found on this thread.
This is regarding opening the mechbox.

if you're not sure yet then i suggest you go to

www.mechbox.com

and look for version 3 disassembly

ok, lets get dirty...



SURPRISE!!! JG kicked TM's butt externally AND internally!!!



WOW!!! I love JG!


the following is something that every newbie should do whenever you disassemble the mechbox ...



continued...

[METAL]

Originally Posted by malloski

Thanks for the invite! Below is my pic at the Pajo field 5 years ago (with my then... TM Spetsnaz)




for you to survive pajo,MAXIMUM camoflage is recommended. hehehe
that camo by the way is made from a black laundrybag net with artificial plant leaves tied. (around 100 - 150 leaves)

Cheers!

you'll see there your old comrades/teamates,they are again playing,bannering your team name ,if ever you belong to that team that said to have history and legacy to preserve, uphold and continue. you have the same story about kicking the butt of AGL (ur counterpart back then)> i think they need you now in order to maintain the legacy or better of just preserve it and just let history of the past close that era.

[METAL]

sana makadalaw ka. kung sakaling uwi ka sa meyc.,Thanks sir!

[malloski]

... JG upgrading continued...

its now time to do a CYLINDER MOD

ingredients:

* stock brass cylinder
* soldering iron
* soldering lead
* aluminum foil or coke can
* pipe used for holding the foil (remember the deadweight that you see whenever you disassemble the upper receiver?)

The Cylinder Mod is a cost-saving upgrade that increases air volume. The stock brass cylinder has a hole that some say is essential for timing however, real-world tests disproves this. The only effect noticed is a much higher FPS. I was a sucker for buying a "holeless" cylinder in the past and I'm just giving you an option not to do so.



ok... let's do it
















Tada!

please follow the notes carefully.

continued...

[malloski]

Originally Posted by METAL

sana makadalaw ka. kung sakaling uwi ka sa meyc.,Thanks sir!

Hi bro,

you'll be the first one to know when I return

cheers!

[malloski]

... JG upgrading continued...

Ok lets go back in time and continue with our mechbox...









i replaced the stock brass cylinder with my old systema "holeless" cylinder








Shimming: this has got to be one of the most hardest tasks involved in mechbox works. Shimming takes time and patience.

please refer to ralph's guide

http://www.airsoftforum.com/board/lofiversion/index.php/t52842.html


The following pic illustrates how i arrange my shims



to be continued...

[Zatoichi]

gosh, i didn't know shims had different sizes.

so we gotta be careful , meticulous with these tiny shims.

very informative shims link....ty

[METAL]

Originally Posted by malloski

Hi bro,

you'll be the first one to know when I return

cheers!

Thanks sir, for sharing ur knowledge!

[malloski]

Hi Bros,

once again thanks for your interest, I wanted to share as much info as i can regarding AEGs.

I was once a newbie and got stuck on doing some experimenting with no one to help me... i won't let this happen to you
I'm a little busy this week so my technical discussions will continue after Christmas.

Have a very merry Christmas everyone!

Cheers!

[Zatoichi]

thanks Sir Malloski.

.........MERRY CHRISTMAS and a HAPPY NEW YEAR...