shaving the 2nd tooth, any benefits?

[bob]

i would really appreciate if you can share some benefits of shaving the 2nd tooth of the piston body coz i want to have it done on my replacement. will it affect also the fps of my gun? i'm only using PDI 190 spring.TIA

[limar]

Shaving the 2nd tooth is recommended especially on polycarb piston bodies with upgraded spring, high Rate-Of-Fire setup. the idea is to make the sector gear have a better engagement with the piston body by putting a spacer bet the piston head and body and at the same time avoiding the engagement of the sector gear's 1st tooth engaging with the the piston body's 2nd tooth on high speed setup. as a reference you can also shave one-half of the 3rd piston body tooth if your setup is 15 and above rps.

try reading this post: http://www.filairsoft.com/forum/showthread.php?t=43413

[Reds14]

sir ask ko lng kelangan pb lagyan nugn spacer sa piston body and head? kc prang sakto na ung Angle Of Engagement nung first tooth nung sector gear sa piston body nung ginawa ko 2ng mode n 2 tnx!

[limar]

Originally Posted by Reds14

sir ask ko lng kelangan pb lagyan nugn spacer sa piston body and head? kc prang sakto na ung Angle Of Engagement nung first tooth nung sector gear sa piston body nung ginawa ko 2ng mode n 2 tnx!

in guess you dont need spacers for metal teeth pb, but it is recommended for plastics or polycarbs, unless as you mentioned, sakto sya.

[manuever04]

nice info sir.

[markphiliplim]

i shave the 2nd and 3rd tooth

[manuever04]

Originally Posted by limar

Shaving the 2nd tooth is recommended especially on polycarb piston bodies with upgraded spring, high Rate-Of-Fire setup. the idea is to make the sector gear have a better engagement with the piston body by putting a spacer bet the piston head and body and at the same time avoiding the engagement of the sector gear's 1st tooth engaging with the the piston body's 2nd tooth on high speed setup. as a reference you can also shave one-half of the 3rd piston body tooth if your setup is 15 and above rps.

try reading this post: http://www.filairsoft.com/forum/showthread.php?t=43413

he he he ... now i know, what you're doing in the garage this morning. my bro said

[v2s13]

When shaving the 3rd tooth kailangan ba 1/2 lang or better yung whole 3rd tooth ang dapat i sahve mo?

[antsterling]

when fixing the AoE, I shave the 1st tooth down and leave about 1/4th of the 3rd.

Just opened up my Gearbox to test the sorbo pads. I checked my piston (cheap clear element piston body, the one that comes free with their high speed gears). The piston looks brand new, no signs of wear due to the AoE mod - and this is after around 8000 rounds on a high speed set-up

[alencore]

since naka buka gb ng beng ko hehe gawa ako video nito para ma-gets nyo tlga bakit kailangan alisin yang pahamak at pasaway na 2nd tooth na yan at pati 3rd tooth sa mga really high rof set up hehe.

it's a simple diagnosis actually but it's way better for the noobs to see the actual diagnosis.

will post the vid soon!




http://www.airsoftadvance.com/Forums...8752#post68752
hmmmm.... well i do this as well if the 1st tooth of sector gear is hitting below the 1st tooth of the pb kung baga di tama yung meshing nya sa una palang.