Hk 416 user needs help

[monster101]

Mga Sirs, I need help.

Recently, I managed to wreck my 2 month old JG HK416. Being a noob, I had its piston body "smoothened" due to dry firing. Lesson learned.
Last week, I had the piston body replaced, and also have it upgraded, referred to my gunsmith as level one upgrade.

Spring SP140
Shims
Bushings

All went fine. My only complain now is my fully charge battery would last an hour or a magazine load of BB's. (Stock battery) Is my battery defective? Or do I need to have it replaced by another type? Ano naman po kaya ang kailangan ko.

[Du Ruo]

http://www.filairsoft.com/forum/showthread.php?t=44971

read mo to

[dilson]

pra sa akin, I think battery mo is not defective, considering na ur using sp140,na ddrain agad kc medyo matigas na un spring mo sir,,kelangan mo siguro ng lipoly,, but u still need to change your piston body un medyo matibay na .. consult your gunsmith..

[monster101]

Originally Posted by dilson

pra sa akin, I think battery mo is not defective, considering na ur using sp140,na ddrain agad kc medyo matigas na un spring mo sir,,kelangan mo siguro ng lipoly,, but u still need to change your piston body un medyo matibay na .. consult your gunsmith..

thanks for the advise sir. I've change the piston body - deep fire na titanium.

[gabkrys]

sp140 will easily drain a stock 8.4v battery. change to a 11.1v lipoly 15c...

[hector8]

mahusay gunsmith mo sir, kayang i-crank ng stock bat sp 140, ako natsambahan ko sp130 nai-crank ng stock 8.4 batt.
back to topic sir, u need to change your batt from stock to higher voltage para mas matagal ang gamit, matigas kasi masyado ang sp140 para sa stock batt.

[monster101]

Originally Posted by gabkrys

sp140 will easily drain a stock 8.4v battery. change to a 11.1v lipoly 15c...

Thanks bossing....

Originally Posted by hector8

mahusay gunsmith mo sir, kayang i-crank ng stock bat sp 140, ako natsambahan ko sp130 nai-crank ng stock 8.4 batt.
back to topic sir, u need to change your batt from stock to higher voltage para mas matagal ang gamit, matigas kasi masyado ang sp140 para sa stock batt.

Thanks bossing....

isa po mga sir....

pag nagpalit ba ako ng higher voltage battery / lipoly, wala na ba akong ibang dapat palitan sa internals, hindi ba mag kakaproblema sa mga gears? (stock gears)

[Jay Santos]

Originally Posted by monster101

isa po mga sir....

pag nagpalit ba ako ng higher voltage battery / lipoly, wala na ba akong ibang dapat palitan sa internals, hindi ba mag kakaproblema sa mga gears? (stock gears)

higher spring = higher tension
upgrading your spring will require you to upgrade your battery as well.
stock gears on lipoly will wear down soon depending on how you fire your weapon. wear and tear of gears is inevitable. replace them only if they retire just as not to spend too much at one time. your 140 set-up will affect your internals since it takes a lot to crank this spring.
internals you might need to consider in the future :
1. gears
2. piston body
3. motor
hope this helps.
...jrs out...

[monster101]

Originally Posted by Jay Santos

higher spring = higher tension
upgrading your spring will require you to upgrade your battery as well.
stock gears on lipoly will wear down soon depending on how you fire your weapon. wear and tear of gears is inevitable. replace them only if they retire just as not to spend too much at one time. your 140 set-up will affect your internals since it takes a lot to crank this spring.
internals you might need to consider in the future :
1. gears
2. piston body
3. motor
hope this helps.
...jrs out...

thanks a lot sir.

[mher70]

Originally Posted by monster101

Mga Sirs, I need help.

Recently, I managed to wreck my 2 month old JG HK416. Being a noob, I had its piston body "smoothened" due to dry firing. Lesson learned.
Last week, I had the piston body replaced, and also have it upgraded, referred to my gunsmith as level one upgrade.

Spring SP140
Shims
Bushings

All went fine. My only complain now is my fully charge battery would last an hour or a magazine load of BB's. (Stock battery) Is my battery defective? Or do I need to have it replaced by another type? Ano naman po kaya ang kailangan ko.

Stock batter is 8.4V it can't crank SP140 im sure super bagal ng ROF mo??
use a LI POLY siR^^ we have the same set up of my HK416 it settled 486-495FPS ung sakin hehe